I was surprised someone would order this from Amazon, rather than get one from the nearest convenience shop or supermarket. Those places only sell the normal thing for local use.

I was further surprised that someone would be worried about installing the fuse. Is he also worried about plugging things in generally?

I see the recommendation every so often to buy a fuse locally, but I don’t live in Akihabara.

I HAVE to buy online electronic components, and usually it ends up being Amazon, because other national suppliers insist on charging $15 for courier shipping on a $2 part.

The person lives in an apartment in Britain. Apartments are only built in towns and cities, and are generally within walking distance of convenience shops and supermarkets.

Every plug in Britain has a fuse, so they are about as easy to buy as replacement light bulbs. Probably on the same shelf.

This is fascinating! I did not know this about british plugs.

Why is that? Is it a safety measure?

British household electrical systems are normally built as one large ring circuit, originally in order to save copper after WW2.

This means you don't have breakers for each branch circuit (there are no branch circuits), just the single mains breaker for the house. This single breaker is too large to trip from a short from occuring in the smaller wires inside an appliance.

So each plug (or hardwired device) needs it's own dedicated smaller fuse instead.

Houses built post-1960s (with more than one floor) will have more than one socket ring each protected by a circuit breaker at the distribution board, usually one per floor for general sockets, with a separate one for the kitchen, and usually individual 32A breakers for things like electric ovens and hobs.

Lighting rings are also separate, usually on 6A breakers. We cheap out on cable by not running neutrals to the switches, which causes nerds headaches when they want to install generic smart light switches.

My house is reasonably large (worked hard, all my own money) and has a 20-way distribution board with separate socket and light rings for groups of rooms. It’s handy for isolation purposes.

More recent builds’ rings will be protected by a combination of MCBs and RCDs, or individual RCBOs (now the cost has come down) which combine the two functions and is ultimately the safest option for most situations.

Individually fusing plugs (and in the case of high-draw appliances like washing machines and dryers, protecting with a fused socket) is still a very good idea. And don’t get me started on earthing practices in other countries…

Im curious as to why the practice continues. Are any houses built with branch circuits?

To add: Many pre-90s buildings don’t even have circuit breakers, they have fuse boxes with fuse wire (different fuse to the one being talked about). Literally just a piece of wire that burns out at a certain current and breaks the connection. You “reset” it by putting a new piece of wire in.

The second fuse at the plug allows using a narrower gauge of wire in the device’s cord. Let’s say you have a lamp with a 3A fuse, the cord only needs to be able to handle 3A, so then it can be lighter and cheaper. If it had to handle the same amperage as the circuit it’s plugged into then it would be seriously impractical and expensive.

Of course there are modern ways of solving this but fuses are dirt cheap and already implemented.

My last place had a 1970s Wylex board, which at least had plug-in MCB modules that replaced the fuse wire holders and can be reset. However given you can still buy fuse wire in DIY stores there still must be installations out there that need it. Shudder.

My parents' house still has fuses with fuse wire. They had it rewired when they bought it in the 1980s, and that was the standard then.

A fuse blowing is so rare I don't think they're worried by the inconvenience. It might happen every 5 years or more.

I recently replaced the old fusewire plugs with MCB modules. Really didn't fancy trying to wind a bit of wire around the terminals in the cellar in the dark :)

Let’s say you desperately need a cup of tea. So you buy a cheap 4-way extension cable and 4 electric kettles. You fill all the kettles and turn them on at the same time for maximum tea-making throughput.

The combined load of all the kettles exceeds the rating of the extension cable.

With a fuse: the fuse in the extension cable plug blows, you buy another fuse, and learn some patience.

Without a fuse: the extension cable overheats and causes a fire, your house burns down, and worst of all you still don’t have any tea.

Without a fuse, the circuit breaker trips and then you go reset it and hopefully learn not to plug in so many kettles next time.

You would have to be a maniac to wire up a house without fuses or breakers.

From sibling comment:

> British household electrical systems are normally built as one large ring circuit, originally in order to save copper after WW2.

> This means you don't have breakers for each branch circuit (there are no branch circuits), just the single mains breaker for the house.

In the UK, there's typically one ring circuit and one lighting circuit per storey, a separate ring circuit for the kitchen, and dedicated circuits for large current draws such as an electric oven or hob, shower, or immersion heater.

Each circuit would have a dedicated MCB (Miniature Circuit Breaker) which will trip if too much current is drawn. The standard MCB rating for a ring circuit in the UK is 32A.

Your 6-way extension strip cable has still caught on fire thiugh

Thanks for clarifying. I took the fuse in the article to mean something like an appliance fuse, which for some reason, was conveniently located in an accessible place.

That's what immediately stood out to me, why the hell would you order it from Amazon instead of literally driving 5 minutes down the road to pick one up from any electronics or hardware store? what a horribly inefficient way to do things

For US readers: The big orange or blue store are probably better for you for anything electric that would go in your walls. I went down a rabbit hole of amazon clones of popular brand things like switches/dimmers/outlets and what I found is dubious UL certificates shared by multiple "brands".

> what I found is dubious UL certificates shared by multiple "brands"

Have you reported it to UL?

https://www.ul.com/resources/market-surveillance-departments