The bag weight sensors was something I was very happy to see go away. I hated self checkouts for years because it was a miserable experience of it freezing every third item and requiring someone to come get it working again. I only realized this tech had changed when COVID forced me to try self checkout again and it was suddenly a very pleasant experience, though one I have to imagine causes a lot of shrink for stores.
If you don't mind me asking how do they fit around your shoulder to bicep area? I tend to need to size up a lot not just for height but for space in that area for myself. A lot of more slim fitting stuff fits me nice overall but basically strangle my armpit and surrounding area. I've resorted to an extremely baggie style to get better space around the sleeve, especially on t-shirts.
Everything I've gotten from 2tall has fit a bit differently, some are a bit roomier there and some are a bit more restricting. I have to order two different sizes of each top I get, because some will fit better in the smaller size and some fit better in the larger. Tall Slim Tees has a smaller selection, but their sizing has been much more consistent for me.
I've never had an issue with feeling restricted in the shoulder area like you're saying though, so I'm probably not the best person to judge that, unfortunately.
Yeah outside of areas with very light precipitation a pretty hefty snowblower is definitely required. In my experience the weaker models are enough of a waste of energy to where I questioned if I'd save effort just hand shoveling. Everyone I know with a nice gas powered one has had the same one for years and can clear out the entire block with relative ease.
My last apartment had the basic unending sound of a leafblower from Spring to late Fall, nearly every morning, unending. Never once did I find myself thinking "wow I sure do hate sight of fall leaves" or "this grass really needs the mm of grass every meter removed", yet they were paid to come multiple times a week year round and blow things around for hours on end. Felt like such a waste in an otherwise neglected apartment complex as far as maintenance.
I get the use of leafblowers for some. I lived in the deep woods and we'd have to clear a pretty large swath of area every fall to not swim through shin-deep leaves for half the year, but if you already are in an area with light enough tree density to grow nice grass I just personally don't understand the utility of some 1000CFM gas leafblower. I got my parents a relatively cheap electric leafblower and it's been excellent for clearing their driveway and paths.
It's definitely a more personal gripe, but those obnoxious droning leafblowers are one of the worst sources of noise pollution in suburban areas by a large gap.
> Godot to Lumberyard
Do you remember what project(s) this was? I'd be super curious on the motivations of the developers. I guess I could see it when it first went open source and Godot wasn't all it was today.
It was a project I worked on as an intern at Electric Boat. I can only speak to specifics I was explicitly given the okay to share though (i.e. this is all on my LinkedIn).
The project was a virtual training simulation for a submarine cockpit, first in Blender Game Engine. With support for BGE being deprecated, I was tasked to find an alternative engine and to port the work. (I'm very proud my research pointed to Godot- this was during the Godot 2 era).
There was a lot of interest in the project, but my internship was coming to an end and they decided to port it to Amazon Lumberyard for fear of Godot's longevity and support. They didn't want to be left "waiting for Godot". The final task I took on was to document the project, to make that transition easier for whoever came next.
I housesitted at a very nice house with an induction stove and it was one of the most anti-human designs I've ever experienced in a stove. If I wasn't being as clean and tidy as possible for the sake of the homeowners I couldn't imagine how much worse it could've been as the entirely touch based interface added a whole other layer of frustration on top of the extremely confusing UX. I thought this was maybe unique to this stove but every other induction stove I've seen sold at appliance stores has had the exact same layout. I truly don't understand it.
Thanks for mentioning WMR. I was genuinely struggling to remember why I didn't install LTSC previously and that reminded me. Half the reason I'm stuck on 10 even if I wanted to go to 11 is WMR. LTSC would be perfect for me if it wasn't for that little caveat (and a few more if my memory serves correct).
Awesome that they created and then gutted a standard that just bricks my $400 device that they barely even seem to care to support on launch. There's patches that exist for 11 but they're just that, patches, and my WMR experience is already very jank. Nvidia also seems to be the target for most development so I'm not sure where I'll go once this all settles as I have my gaming PC in a nice position where I can just hop on after work and everything just works with no interruptions or issues currently.
11 is a hot mess and I already know that linux/proton simply won't work for the games I tend to quickly hop onto with friends.
Other limitations are that modern Adobe products will no longer install on Windows 10 LTSC as it is based on a too old version (but there are workarounds).
WMR situation isn't great but there are ways out. If you have a NVIDIA GPU then you can use Oasis on Windows 10 LTSC (AMD GPUs require Windows 11 24H2 for Oasis). Also on Linux, support for WMR devices has improved markedly via Envision / Monado, but some tinkering is required and it is still behind Windows.
The build part was really helpful for me when I really struggled with EE. My program only ever made us build things for very first semester "build a circuit to light up the LED" type labs. Once we got to even the most basic of components it all became on paper. I really struggled with some of the mental models to the point where I made a habit of going out of my way to build a lot of circuits that I was just supposed to solve on paper. Getting everything correct felt no different to getting things completely wrong in a paper problem until I actually built out the circuits and suddenly "correctness" actually became a real thing that I was tangibly experiencing. I wish my program would've at least taught SPICE a little more to at least scratch the ability to simulate things a little better.
Yeah I had a magic-rules-first style experience in my EE program and it really didn't work for me at all. The nebulous reasoning made it for me where I just really couldn't internalize the pretty basic "rules" because I couldn't help but mess myself up overthinking the more abstract modes of conceptualizing everything which just confused me more. I'm thankful because it gave me the opportunity to quickly learn that I was a lot better at code than circuits, I probably would've been screwed if it took me that long to get to that point in my educations, but I will say the magic rules just did not work for me personally as a way to understand things. I'm sure others would do a lot better at just jumping right in though.
