They are things that you know, that you don't know you know. For example, uncovering links between existing knowledge that uncovers something that then feels obvious.
This happens occasionally where two previously thought seperate fields of study discover a common link with each being able to explain the questions the other had struggled with.
Yup. My daughter (15y) had the perfect example this morning. She said she was thinking about shooting a person with a cannon upwards, then realizing they feel effectively zero gravity at top, and maybe this could be usefull. Then she remembered parabolic flight paths to train astronauts, realized it’s the same thing, and that she started wondering about a thing she already knew.
Lots of people know things deeply in their subconscious that they are fully ignorant of in their conscious thinking. These can manifest as gut feelings, or anxieties, and with therapy, can be identified. Things like "you should leave him", or whatever.
Based upon the recruiters messaging me, if I gave up my remote job for one that required in-office attendance I would get an immediate 30% pay bump.
That would however, demand an hour and half commute each way and that would impact my ability to take my children to school and be involved with family meals. Back when I did have a hour commute each way it was costing me £2,800 a year in fuel, plus £2,220 in parking fees, plus about the same again for lunch out with colleagues.
So yeah, i'd get a 30-40% pay bump, but a large percentage would be consumed by additional costs with no benefit to my performance.
Not forced but the tooling has been made available to those who ask. Work have provided Microsoft Copilot through Teams and Github Copilot through my IDE of choice.
I found the Microsoft Copilot to be reasonably good when given a complete context with extremely limited scope such as being provided a WSDL for a SOAP service and asked to write functions that make calls and then writing unit tests for the whole thing. This had a right way and a wrong way of doing things and it did it almost perfectly.
However, if you give it any problem that requires imagination with n+1 ways of being done it flounders and produces mostly garbage.
Compared to the Microsoft Copilot I found the Github Copilot to feel lobotomised! It failed on the aforementioned WSDL task and where Microsoft's could be asked "what inconsistencies can you see in this WSDL" and catch all of them, Github's was unable to answer beyond pointing out a spelling mistake I had already made it aware of.
I have personally tinkered with Claude, and its quite impressive.
My colleagues have had similar experiences, with some uninstalling the AI tooling out of frustration at how "useless" it is. Others, like myself, have begun using it for the grunt work; mostly as "inteligent boilerplate generator."
I had similar many years ago in a custom paint shop. We had an expensive colorimeter that interfaced over serial with a program that ran in DOS.
When the pysical computer gave out, I replaced it with a reasonably new one but instead of using a modern OS I installed MS-DOS in order to get it up and running as reliably and quickly as possible.
If I were doing the same today, I'd likely get a new computer and install FreeDOS.
Yes. When I started working in hospitals it wasn't the case. We had an onsite laundry facility and tailor. You would obtain your uniform from the tailors, tailor made to fit, they would also repair any damaged uniform.
You would place worn uniform in a bag labeled with your name and drop if off at the laundry to collect the next day.
Then privatisation came, first they shut down the tailors and you were expected to both purchase your uniform and pay for alterations and repairs (costs you could claim back as a tax rebate if you knew how, how not being advertised.) Then they privatised the laundry, shutting down the one on site and shifting everything to a central location, by everything I mean just the bedding, you were now expected to wash your uniform at home.
The only exception I am aware of is Surgical scrubs, those were provided in sterile wraps and were to be returned to a certain laundry bin for cleaning.
You're right about the food industry, when I worked in kitchens that days uniform was provided, freshly cleaned and returned for laundering at the end of my shift.
I guess a lot of people don't leave the door open so the machine can dry between loads. None of my washing machines have had issue with smell but I also run a 90 degree boil wash once a month to clean things out.
It's almost as though people forget these are machines that require maintenance and cleaning.
My Maytag Neptune retains so much water from the previous load, that leaving it open is absolutely ineffective. It molds after 3-4 days no matter what. I can spin the drum after leaving it open for 2 weeks, and it still makes a pronounced sloshing noise, there's still a ton of water left in there.
I suspect this was meant to reduce the fill water used in the subsequent load, but that's only sensible if you're doing laundry every day or two. If you go longer between washing sessions, it's just making clothes stinky. Perhaps it's backwash from water left in the discharge hose after the pump shuts off?
So for years, I just run the first cycle empty, hot, with a bunch of bleach. It wastes more water than this stupid measure could ever possibly save, but it keeps my clothes from being stinky.
That machine was just damaged in a flood so I'm shopping for a replacement as I write this, and I cannot for the life of me find this information in any reviews. Does it drain fully? How much water is left behind?
A friend pointed out that some machines have a little pigtail hose out the back with a manual drain valve on it, presumably meant to completely empty the machine before transport. Their theory is that I could put a solenoid valve on this and install my own tiny pump to finish draining the machine after a session, possibly a peristaltic pump which wouldn't be susceptible to backflow from the lift. But again, I can't find information in the reviews about whether any given new machine I might buy, has this little drain pigtail.
When I first switched to the front load washer I started getting a terrible smell pretty quickly.
How I got rid of it.
1) do not use liquid detergents. powder only. My working theory is the medium used to make it gooey was sticking and giving the mold a good medium to live in.
2) do not use liquid fabric softeners. see #1. I use a fabric sheet on drying.
3) clean cycle once a month
4) washer tablet in with the wash clean cycle, I alternate with bleach every other month.
5) leave the door open between washes
6) drain out the water from the 'pigtail' once every 6 months, or whatever the documentation recommends. It is not just for when you move it. It is meant for the next step.
7) clean out the lint trap. Many have this just before the drain out and before the pump. That thing can get really gunked up. especially with liquid detergents/softners. I use the same schedule as the drain out.
#1 and #2 were the main sources for me. Took about 2-3 weeks before the smell was gone.
For my samsung I would say about a 1/4 gallon is left in the hoses.
Powder detergent leaves residue also, because it doesn't ever fully dissolve.
I think washers may leave a bit of water in the "sump" so that the pump doesn't run dry. Running dry is typically not good for pumps. Shouldn't need to be a lot though.
Oooo, #1 is fascinating. I've always used liquid and never considered this. I always run with the extra rinse enabled and no softener, so the fabrics come out clean enough that they don't smear optics. I really don't think anything's left behind, but it's an interesting theory.
7: I'm 99% sure none of my washers have ever had an integrated lint trap. I ziptie a mesh-sock trap onto the drain hose so it doesn't clog the washtub drain, and the amount of stuff it accumulates means that any machine-internal lint trap would've been clogged solid in the first few months. There's no mention of one in the manual, either.
I wonder if I didn't drain it upward into a washtub, but downward into a floor drain, if that would eliminate the water-left-in-hoses problem...
It is not much of a 'trap' it is basically a plastic filter just before the drain out. Think it mostly is to keep big stuff out of the sump. But bits of cloth and hair can get stuck on it. You also probably do not want to totally drain it all the time. The sump as someone else pointed out needs to stay wet.
On mine it is a circular item that you can twist out. If I do it before draining water comes dumping out of that. So I drain then clean that thing. Bit of hot water and a bit of scrubbing.
A note on liquid versus powder detergents. In the UK, at least, my understanding is that liquid detergents do not contain bleaching agents, whereas powders do. That is, unless you buy a colour-safe powder.
If you're pouring bleach into your machine, it can erode the rubber seals. I use Dettol instead (I think it's called Lysol in the States), which seems to do the job.
A bit of bleach once and awhile is ok. There is even a spot for it to be put in on the detergent tray. I do not use it all the time. I stick to the powder and a cup or so of bleach every now and then on a clean cycle (once or twice a year). Pretty sure it is a color safe powder I am using.
I'm lucky enough in terms of layout that I can leave the door wide open AND the detergent drawer open when it's not in use. That allows a kind of "fresh air circulation" between the drawer and the door. That ventilates the whole system. I don't get any smells. I use powder detergent, no cleaning cycles except the occasional wash at 90 Celsius. This is a UK machine though, US may be different.
> 2) do not use liquid fabric softeners. see #1. I use a fabric sheet on drying.
Have you tried vinegar in the wash and wool dryer balls? I pre-wash with vinegar and add an extra rinse cycle. It's way better than fabric sheets and the balls also speed up the drying process.
Vinegar is also good for dissolving lime, which builds up in the washer when you have "hard" water and will make it stink - not a mold stink, though, more some kind of bacteria that loves to live in lime. In this case it has nothing to do with residual water.
And vinegar is a pretty good cleaning agent all by itself.
> I can spin the drum after leaving it open for 2 weeks, and it still makes a pronounced sloshing noise, there's still a ton of water left in there.
Is it a top loader? If so double check to make sure you are really hearing left over washing water and not balancing water.
Most top loaders have a sealed hollow ring around the drum, usually near the top but sometimes at the bottom, that is partly filled with water or a saline solution. The liquid in the ring redistributes itself around the drum during spin cycles in a way that counters an off balance load in the drum which reduces vibration and noise.
If you spin the drum by hand the balancing liquid sloshes around and it can be quite noticeable on some washers. Next time you are at an appliance dealer try spinning the drums in some of the top loaders on display. It can sound like a surprisingly large amount of water.
I too am very annoyed by the "save water" trend in appliances that then produce inferior results. Yes, I know there are parts of the world where this is a concern, but I'm in the great lakes region on a well that produces 20GPM of water and I do not have this concern. Water for me is copious and basically free and when I'm done with it it goes into my septic to reabsorb into the water table.
We switched from a front loading washer back to a top-loading one hoping we'd get results similar to the top-loading washers from our youth. But nope. Funky smells, poor distribution of detergent, clothes that don't fully clean.
> We switched from a front loading washer back to a top-loading one hoping we'd get results similar to the top-loading washers from our youth. But nope.
As sibling comment says, get yourself a Speed Queen, made with commercial parts and still washes the good old fashioned way [0].
We had bad smell with just drying all reachable areas and leaving open the door, cleaning everything that is easy disassembled (tubes, water outlet area of the pump) from tine to time.
2 months ago we discovered the boil wash. With some detergent containing bleach it stopped the smell, even if we leave the machine closed during the day.
I our case it's not we have forgotten but never discovered this function.
This happens occasionally where two previously thought seperate fields of study discover a common link with each being able to explain the questions the other had struggled with.